Simple Way To Do D-Link Range Extender Setup

Are you looking for a simple way to perform a D-Link range extender setup? Guess what? You are on the right platform in that regard. This blog elaborates on two different ways of doing a D-Link range extender setup i.e., via the WPS method and web browser method. So, make sure you follow the guidelines very properly to complete the extender set up and use its extended signals and fast-speed internet.  

A Simple Way To Perform D-Link Range Extender Setup Via WPS Method:

STEP 1: To begin with the setup, locate your extender and wifi router in the same room.

STEP 2: The next step is to insert the D-Link extender into a functional socket.

STEP 3: Now, push the WPS button on the wifi router network, next.

STEP 4: Look for the LED indicator and see if it turns green.

STEP 5:  When the D-Link wifi extender and the main wifi router are connected, the green LED indicator will turn solid.

STEP 6: The final step involves relocating the wifi range extender to a location where signals are poor.

A Simple Way To Perform D-Link Range Extender Setup Via Web Browser Method:

STEP 1: Take an ethernet wire and connect your D-Link extender with the PC device.

STEP 2: Open the wireless utility function on the device that you are using to configure the extender.

STEP 3: From here, select the name of the main WiFi network with which you want to connect your extender with.

STEP 4: Proceed further by launching an internet browser and then write the web address dlinkkap.local to hop onto the web interface of the extender.

STEP 5: In case, the web address is not working then launch the default gateway using the IP address 192.168.0.50.

STEP 6: This default IP address of the range extender will also redirect you to D-Link range extender setup page.

STEP 7: Now, type in the login information in their respective slots and hit the Login key to proceed.

STEP 8: Once you reach the configuration web interface, press the Setup tab to continue with the setup.

STEP 9: Afterward, unfurl the D-Link WiFi extender setup wizard and follow the prompts.

STEP 10: Now, begin with the configuration settings of wireless and security settings of the range extender.

STEP 11: Hit the finish tab to wrap up the D-Link WiFi range extender setup.

STEP 12: It is mandatory to reboot the D-Link WiFi range extender and then link other WiFi-compatible devices with it.

Roll With Your D-Link WiFi Range Extender!

Weren’t the above-mentioned steps easy and simple? We have framed this blog assuming that the reader is new to the extender and it is this/her first-time setup. This extender takes the responsibility to get rid of the network dead spots and extend the WiFi signals to every nook and corner of the house. So that’s it! With your D-Link range extender setup completed you can roll with browsing and surfing whatever you like, wherever you like.